- Version 20251111
- Download 63
- File Size 3.09 MB
- File Count 1
- Create Date 11 November 2025
- Last Updated 11 November 2025
Firmware – Release 1.0.0 Alpha 26 (20251111)
Changes since last release:
- ADC sensors set global faults - allows other code modules to detect sensor faults
- CAN broadcast can broadcast these faults
- Add CAN logger functionality
- Wideband O2 control
- Change warmup logic to ensure slow warmup on cold start
- Estimate sensor temperature when sensor temperature is low
- Other safety features to preserve sensor life
- Control wideband pumping reference current (more accurate sensing)
- Errors trigger global faults
- Pit lane limiter allows RPM and VSS instead of just VSS
- CEL works without a physical light output
- CEL works on min/max volts instead of ADC counts
- CLT/MAT trigger CEL based on sensor calibration settings and use global faults
- Use status16 for oil pressure warning, trigger in Lotus CAN broadcast
- Throttle target modifier (connect to custom tables, custom calculations, etc.)
- Enable missing settings for Calculated Fields
- Fix issue with VVT learn decoder where it briefly falsely displays an angle of 41 degrees immediately after learning
- Correct battery voltage to be accurate to actual voltage (May change dwell/deadtime lookups)
- Electronic Throttle Control tracking and stop avoidance improvements (will require retuning PID settings)
- Fix loggers (CAN, tach scope, etc...) so they don't randomly pause sending data
- Fix an issue observed with 60-2 and second trigger where trigger angles over 330 degrees would have timing off by 2 teeth (12 degrees). Users must re-check ignition timing and fix tooth #1 angle if timing is off. Could occur on other missing tooth crank wheel plus cam trigger wheel configurations as well.
- Synchronize datalog data to datalog storage every few seconds to avoid data loss on standby power loss
- Update datalog filesystem code (bug fixes)
- Add SDCard format command (use if datalog flash becomes corrupt, causing datalogging to stop working)