Firmware - Release 1.0.0 Alpha 20240409

Recent Changes:

VVT channels 2-4 can now be enabled, locked to cam 2-4 inputs (so the setting is removed)
Cam polarity is now applied.
Configuration still needs work. To configure the inputs, enable VVT and set the number of cams greater than 1.
Launch control settings are now configurable, and the feature is working as intended
Increased internal communication speed between engine and comms chips. There should be some improvement in initial interrogation speed
Added the ability to use RS232 comms on the same ECU pins that can be used for GPS. If GPS is enabled on those pins, regular RS232 comms with the PC are disabled there. Otherwise it should work with any decent USB->serial controller at 115200/8/N/1 settings.
- NOTE: Datalog downloads and firmware updates do not work via RS232. They are USB only.
Comms reliability fixes

Firmware – Release 1.0.0 Alpha 20240409