- Version
- Download 3
- File Size 68.71 MB
- File Count 1
- Create Date 12 April 2024
- Last Updated 12 April 2024
Recent changes
- Line-shaped follower for the table in curve dialogs
- Fix digits display/storage for axes in curves and tables
- Fix units handling for axes in tables.
- Some panel usability improvements
- Table font size can be set separately from everything else
- Make updates on one tab reflect everywhere in the application if any other open dialogs are affected by those settings. e.g. Clicking apply-to on the LTFT table while VE is open - those changes will show in the VE table immediately.
- Comms subscriptions for data - Only realtime data being used by gauges, indicators, or PC datalogging is fetched from the ECU. Reduces realtime data fetches from ~1k per record to < 100 bytes in most situations. Allows RS232 comms at 115200 baud to be useful.
- Add and optimize gauges and indicators - can be selected while in "edit current panel" mode by selecting "System Functions" and clicking "New Gauge" or "New Indicator" in the configuration tree. Note that if you're not in edit mode, this will open the gauge selector in the home tab, which is probably not what you want. Gauges and indicators can be resized, and the font dynamically scales with the window size.
- Retransmit requests for data when we get a short response. Shouldn't happen but could happen due to noise on the USB cable, or for other reasons.
- Calibration file loads are more reliable in all situations.
- Calibration file loads when connected now show progress based on the ECU responding that it received the data rather than just the tuning software sending it. The progress bar is actually useful.
- Reworked "edit mode" on panels so that:
- Window contents don't change size when going in and out of edit mode.
- When you pop up a new window, it autosizes to a reasonable size for the contents of the window
- Gauges and Indicators are now added using the right-click context menu in each panel.